</a>MEMS" title="MEMS">MEMS" title="MEMS">MEMS麥克風,包括有MEMS傳感器,信號調理,ADC,抗混淆濾波器,電源管理以及工業標準的24位I2S接口,并直接連到數字處理器如DSP和MCU.SNR為61 BA,靈敏度為−26 dBFS,平坦的頻率響應60Hz到15kHz,主要用在遠程會議,游戲控制臺,移動設備,筆記本電腦,平板電腦和安全系統.本文介紹了ADMP4411主要特性,方框圖,系統框圖和評估板子板EVAL-ADMP441Z電路圖,材料清單.
The ADMP4411 is a high performance, low power, digital output, omnidirectional MEMS microphone with a bottom port. The complete ADMP441 solution consists of a MEMS sensor, signal conditioning, an analog-to-digital converter, antialiasing filters, power management, and an industry standard 24-bit I2S interface. The I2S interface allows the ADMP441 to connect directly to digital processors, such as DSPs and microcontrollers, with-out the need for an audio codec in the system.
The ADMP441 has a high SNR and high sensitivity, making it an excellent choice for far field applications. The ADMP441 has a flat wideband frequency response, resulting in natural sound with high intelligibility. A built-in particle filter provides high reliability.
The ADMP441 is available in a thin 4.72 mm × 3.76 mm × 1 mm surface-mount package. It is reflow solder compatible with no sensitivity degradation. The ADMP441 is halide free.
ADMP4411主要特性:
Digital I²S interface with high precision 24-bit data
High SNR of 61 dBA
High sensitivity of −26 dBFS
Flat frequency response from 60 Hz to 15 kHz
Low current consumption of 1.4 mA
High PSR of −75 dBFS
Small 4.72 mm × 3.76 mm × 1 mm surface-mount package
Compatible with Sn/Pb and Pb-free solder processes
RoHS/WEEE compliant
ADMP4411應用:
Teleconferencing systems
Gaming consoles
Mobile devices
Laptops
Tablets
Security systems
圖1.ADMP4411功能框圖
圖2.ADMP4411系統框圖
評估板子板EVAL-ADMP441Z
EVAL-ADMP441Z SDP Daughter Board for the ADMP441 I2S MEMS Microphone
The EVAL-ADMP441Z is an evaluation board that works with the EVAL-ADMP441Z-FLEX and the system demonstration platform (SDP) to allow quick evaluation of the performance of the ADMP441 MEMS microphone. This evaluation system can be used to stream two channels of audio from two ADMP441 microphones to a PC over a USB connection. The system identifies itself to a PC as a standard USB audio interface; therefore, no additional drivers or software are required to run the system. One EVAL-ADMP441Z-FLEX board is included in the evaluation kit. The SDP-B controller board is purchased separately. The EVAL-ADMP441Z board also provides hardware control and probe/test points to examine the digital signals of the ADMP441.
評估套件包括:
EVAL-ADMP441Z daughter board
EVAL-ADMP441Z-FLEX board
5 V power supply
圖3.評估板子板EVAL-ADMP441Z外形圖
圖4.評估板子板EVAL-ADMP441Z電路圖
評估板子板EVAL-ADMP441Z材料清單:
詳情請見:
http://www.analog.com/static/imported-files/data_sheets/ADMP441.pdf
和
http://www.analog.com/static/imported-files/user_guides/UG-362.PDF
The ADMP4411 is a high performance, low power, digital output, omnidirectional MEMS microphone with a bottom port. The complete ADMP441 solution consists of a MEMS sensor, signal conditioning, an analog-to-digital converter, antialiasing filters, power management, and an industry standard 24-bit I2S interface. The I2S interface allows the ADMP441 to connect directly to digital processors, such as DSPs and microcontrollers, with-out the need for an audio codec in the system.
The ADMP441 has a high SNR and high sensitivity, making it an excellent choice for far field applications. The ADMP441 has a flat wideband frequency response, resulting in natural sound with high intelligibility. A built-in particle filter provides high reliability.
The ADMP441 is available in a thin 4.72 mm × 3.76 mm × 1 mm surface-mount package. It is reflow solder compatible with no sensitivity degradation. The ADMP441 is halide free.
ADMP4411主要特性:
Digital I²S interface with high precision 24-bit data
High SNR of 61 dBA
High sensitivity of −26 dBFS
Flat frequency response from 60 Hz to 15 kHz
Low current consumption of 1.4 mA
High PSR of −75 dBFS
Small 4.72 mm × 3.76 mm × 1 mm surface-mount package
Compatible with Sn/Pb and Pb-free solder processes
RoHS/WEEE compliant
ADMP4411應用:
Teleconferencing systems
Gaming consoles
Mobile devices
Laptops
Tablets
Security systems
圖1.ADMP4411功能框圖
圖2.ADMP4411系統框圖
評估板子板EVAL-ADMP441Z
EVAL-ADMP441Z SDP Daughter Board for the ADMP441 I2S MEMS Microphone
The EVAL-ADMP441Z is an evaluation board that works with the EVAL-ADMP441Z-FLEX and the system demonstration platform (SDP) to allow quick evaluation of the performance of the ADMP441 MEMS microphone. This evaluation system can be used to stream two channels of audio from two ADMP441 microphones to a PC over a USB connection. The system identifies itself to a PC as a standard USB audio interface; therefore, no additional drivers or software are required to run the system. One EVAL-ADMP441Z-FLEX board is included in the evaluation kit. The SDP-B controller board is purchased separately. The EVAL-ADMP441Z board also provides hardware control and probe/test points to examine the digital signals of the ADMP441.
評估套件包括:
EVAL-ADMP441Z daughter board
EVAL-ADMP441Z-FLEX board
5 V power supply
圖3.評估板子板EVAL-ADMP441Z外形圖
圖4.評估板子板EVAL-ADMP441Z電路圖
評估板子板EVAL-ADMP441Z材料清單:
詳情請見:
http://www.analog.com/static/imported-files/data_sheets/ADMP441.pdf
和
http://www.analog.com/static/imported-files/user_guides/UG-362.PDF
本站內容除特別聲明的原創文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯系電話：010-82306118；郵箱：aet@chinaaet.com。