《電子技術應用》
您所在的位置:首頁 > 嵌入式技術 > 解決方案 > Renesas RX630系列32位MCU開發方案

Renesas RX630系列32位MCU開發方案

2012-07-10

Renesas公司的RX630系列是32位MCU,工作頻率最大為100MHz,100MHz時的性能為165 DMIPS,具有單精度32位IEEE-754浮點,兩種類型的乘法和累加器,工作電壓2.7V-3.6V,主要用在嵌入式系統.本文介紹了RX630系列主要特性,方框圖,RX630系列評估板主要特性與指標,方框圖,電路圖和元件布局圖.
 
RX630系列主要特性:

■ 32-bit RX CPU core

? Max. operating frequency: 100 MHz

Capable of 165 DMIPS in operation at 100 MHz

? Single precision 32-bit IEEE-754 floating point

? Two types of multiply-and-accumulation unit (between memories and between registers)

? 32-bit multiplier (fastest instruction execution takes one CPU clock cycle)

? Divider (fastest instruction execution takes two CPU clock cycles)

? Fast interrupt

? CISC Harvard architecture with 5-stage pipeline

? Variable-length instructions: Ultra-compact code

? Supports the memory protection unit (MPU)

? JTAG and FINE (two-line) debugging interfaces

■ Low-power design and architecture

? Operation from a single 2.7- to 3.6-V supply

? Low power consumption: A product that supports all peripheral functions draws only 500 μA/MHz.

? RTC is capable of operation from a dedicated power supply (min. operating voltage: 2.3 V).

? Four low-power modes

■ On-chip main flash memory, no wait states

? 100-MHz operation, 10-ns read cycle (no wait states)

? 384-Kbyte to 2-Mbyte capacities

? User code programmable via the USB, SCI, or JTAG

■ On-chip data flash memory

? Max. 32 Kbytes, reprogrammable up to 100,000 times

? Programming/erasing as background operations (BGOs)

■ On-chip SRAM, no wait states

? 32- to 128-Kbyte capacities

? For instructions and operands

? Can provide backup on deep software standby

■ DMA

? DMAC: Incorporates four channels

? DTC

■ Reset and supply management

? Power-on reset (POR)

? Low voltage detection (LVD) with voltage settings

■ Clock functions

? External crystal oscillator or internal PLL for operation at 4 to 16 MHz

? Internal 125-kHz LOCO and 50-MHz HOCO

? Dedicated 125-kHz LOCO for the IWDT

? Frequency of the oscillator for sub-clock generation: 32 kHz

■ Real-time clock

? Adjustment functions (30 seconds, leap year, and error)

? Time capture function (for capturing times in response to event-signal input on external pins)

■ Independent watchdog timer

? 125-kHz LOCO clock operation

■ Useful functions for IEC60730 compliance

? Oscillation-stop detection, frequency measurement, CRC, IWDT, self-diagnostic function for the A/D converter, etc.

■ Up to 22 communications interfaces

? USB 2.0 full-speed function interface (1 channel)

? CAN (compliant with ISO11898-1), incorporating 32 mailboxes (up to 3 channels)

? SCI with multiple functionalities (up to 13 channels)

Choose from among asynchronous mode, clock-synchronous mode, smart-card interface mode, simple SPI, simple I2C, and extended serial mode.

? I2C bus interface for transfer at up to 1 Mbps (up to 4 channels)

? RSPI for high-speed transfer (up to 3 channels)

■ External address space

? 8 CS areas (8 × 16 Mbytes)

? Multiplexed address data or separate address lines are selectable per area.

? 8-, 16-, or 32-bit bus space is selectable per area

■ Up to 20 extended-function timers

? 16-bit MTU2: input capture, output capture, complementary PWM output, phase-counting mode (6 channels)

? 16-bit TPU: input capture, output capture, phase-counting mode (12 channels)

? 8-bit TMR (4 channels)

? 16-bit compare-match timers (4 channels)

■ A/D converter for 1-MHz Operation

? Up to 21 12-bit channels, and incorporating 1 sample-and-hold circuit

? Up to 8 10-bit channels, and incorporating 1 sample-and-hold circuit

? Addition of results of A/D conversion (in the 12-bit A/D converter)

? Self diagnosis (for the 10-bit A/D converter)

■ 10-bit D/A converter: 2 channels

■ Temperature sensor for measuring temperature within the chip

■ Register write protection function can protect values in important registers against overwriting.

■ Up to 148 pins for GPIO

? 5-V tolerance, open drain, input pull-up, switchable driving ability

■ Operating temp. range

? –40 degree C to +85 degree C

圖1.RX630系列方框圖

RX630系列評估板

The Renesas Starter Kit for RX630 is intended as a user-friendly introductory and evaluation tool for the RX630 microcontroller. The kit also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging. This includes a choice of IDEs between the High-performance Embedded Workshop and e2studio.
 The Renesas Starter Kit for RX630 may be connected to the host PC using a simple RS232 serial connection or via the included USB E1 on chip debugging interface.

The purpose of the board is to enable the user to evaluate the capabilities of the device and its peripherals by giving the user a simple platform on which code can be run only minutes from opening box. It can also prove an invaluable tool in development by providing a useful test platform for code already debugged using one of our more powerful emulation tools.

This RSK is an evaluation tool for Renesas microcontrollers. This manual describes the technical details of the RSK hardware. The Quick Start Guide and Tutorial Manual provide details of the software installation and debugging environment.

RX630系列評估板主要特性:

This RSK provides an evaluation of the following features:

? Renesas microcontroller programming

? User code debugging

? User circuitry such as switches, LEDs and a potentiometer

? Sample application

? Sample peripheral device initialisation code

The RSK board contains all the circuitry required for microcontroller operation.

圖2.RX630系列評估板方框圖

The LCD display module is supplied as a detachable sub-board. The board dimensions are 120 mm by 100 mm, detailed dimensions are available in the user manual.

圖3.RX630系列評估板元件布局圖
RX630系列評估板主要指標:

Item

Specification

Microcontroller

R5F5630EDDFP

Input Clock

Main: 12 MHz

Sub: 32.768 kHz

Potentiometer

Single-turn, 10 kΩ

LED

Power indicator: green x 1

User: green x 1, orange x 1, red x 2

Switch

Reset x 1

User x 3

DC Power Jack

5 V Input

Battery Holder

CR2032

E1 Header

14-pin box header

CAN Connector

2.54 mm pitch, 3-pin (CAN BUS line x 2, GND x 1)

USB Connector

Function: USB-MiniB

RS232 Serial Connector

9-pin DSUB

LCD Display Connector

14-pin socket

Microcontroller Pin Header

2.54 mm pitch, 36-pin x 4 (J1, J2, J3, J4)

Application Board Interface

2.54 mm pitch, 26-pin x 2 (JA1, JA2), 24-pin x 2 (JA5, JA6)

BUS Interface Option

2.54 mm pitch, 50-pin (JA3)



圖4.RX630系列評估板外形圖


圖5.RX630系列評估板電路圖(1)

圖6.RX630系列評估板電路圖(2)

圖7.RX630系列評估板電路圖(3)

圖8.RX630系列評估板電路圖(4)

圖9.RX630系列評估板電路圖(5)

圖10.RX630系列評估板電路圖(6)

圖11.RX630系列評估板元件布局圖:頂層


圖12.RX630系列評估板元件布局圖:底層
詳情請見:
http://documentation.renesas.com/doc/products/mpumcu/doc/rx_family/r01ds0060ej_rx630.pdf

http://documentation.renesas.com/doc/products/tool/doc/r20ut0291eg0200_rskrx630_schematics.pdf
以及
http://documentation.renesas.com/doc/products/tool/doc/r20ut0292eg0100_rskrx630_usermanual.pdf


 



本站內容除特別聲明的原創文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。
主站蜘蛛池模板: 国产成人福利免费视频| 一个人hd高清在线观看| 欧美videos另类极品| 天天射综合网站| 中文字幕日韩wm二在线看| 日韩精品中文字幕无码专区| 亚洲制服欧美自拍另类| 欧美高清视频一区| 国产专区中文字幕| 黄a大片av永久免费| 国产精品一区二区久久沈樵| 91av福利视频| 在公交车上被站着被c| jizzjizz成熟丰满舒服| 成人AAA片一区国产精品| 丰满少妇被猛烈进入无码| 日本特黄特黄刺激大片免费| 九九久久99综合一区二区| 男的把j伸进女人p图片动态| 又大又硬又黄的免费视频| 色网站在线免费观看| 国产女同在线观看| 国产性夜夜夜春夜夜爽| 国产熟睡乱子伦视频| 18禁止看的免费污网站| 国产精品美女在线观看| 91网站免费观看| 少妇人妻av无码专区| 中文天堂最新版www| 无码一区二区三区亚洲人妻| 久久久久综合国产| 日本久久久久中文字幕| 久久国产精品久久国产片| 日韩亚洲欧洲在线rrrr片| 久久爰www免费人成| 日韩中文字幕不卡| 久久精品久久精品| 日韩中文字幕在线观看| 久久天天躁狠狠躁夜夜躁2014| 日本精高清区一| 久久久久无码中|