</a>PFC" title="PFC">PFC" title="PFC">PFC" title="PFC">PFC的控制器,設計用來照明的大功率LED驅動器,采用恒定的導通時間和準諧振開關技術,具有高的功率系數,良好的EMI行能和高的系統效率.主要用在A19 (E26/27, E14), PAR30/38和GU10型LED燈與固態照明.本文介紹了TPS92310主要特性,方框圖,典型應用電路圖,隔離和非隔離拓撲的電路圖,以及TPS92310 EVM-8W評估模塊主要特性,電路圖,材料清單和模塊PCB元件布局圖.
TPS92310: Off-Line Primary Side Sensing Controller with PFC
The TPS92310 is an off-line controller specifically designed to drive high power LEDs for lighting applications. With the primary side sensing, constant on-time and quasi-resonant switching techniques, the TPS92310 application circuit gives high Power Factor, good EMI performance and high system efficiency. Also, using this device, low external component count application solutions can be designed easily. Power Factor Correction is inherent if the TPS92310 is operated in the constant on-time mode with an adaptive algorithm. The control algorithm of TPS92310 adjusts the on-time with reference to the primary side inductor peak current and secondary side inductor discharge time dynamically, the response time of which is set by an external capacitor. Also, minimized EMI and switching loss is achieved with quasi-resonant switching. Other supervisory features of the TPS92310 include cycle-by-cycle primary side inductor current limit, VCC under-voltage lockout, output over-voltage protection and thermal shutdown. The TPS92310 is available in the MSOP-10 package.
TPS92310主要特性:
■ Regulates LED current without secondary side sensing
■ Adaptive ON-time control with inherent PFC
■ Critical-Conduction-Mode (CRM) with Zero-Current Detection (ZCD) for valley switching
■ Programmable switch turn ON delay
■ Programmable Constant ON-Time (COT) and Peak Current Control
■ Over-temperature protection
TPS92310應用:
■ LED Lamps: A19 (E26/27, E14), PAR30/38, GU10
■ Solid State Lighting
圖1.TPS92310方框圖
圖2.TPS92310典型應用電路圖
圖3.TPS92310隔離拓撲電路圖
圖4.TPS92310非隔離拓撲電路圖
TPS92310 EVM-8W評估模塊
The TPS92310 EVM-8W evaluation module is a constant current output LED driver supporting 5W to 8W applications.
The design focuses on applications that require small form factor and minimal number of external components. The actual PCB dimension of the module is only 22mm x 55mm x 19mm (L x W x H). The module can work with AC line input from 90 to 132VRMS or 180 to 264VRMS and supplying 350mA current into a single string of LEDs, typically 6-7 LEDs in series.
The evaluation board is carefully designed to comply with major industrial EMC and safety requirements. The user can make use of the information provided in this document, TPS92310 datasheet and application notes to design its specific end product easily.
The TPS92310 EVM-8W is developed with the TPS92310 controller IC. The TPS92310 is a single-stage AC/DC controller dedicated for LED Lighting applications. The controller uses a primary-side current sense configuration to control the LED current at secondly side. The system works in Critical Conduction Mode (CRM) with flyback topology and it employs a constant on time modulation scheme. Inherently, systems with this configuration can achieve greater than 0.90 Power Factor (PF) easily. The Power Factor (PF) and line current harmonic performances of the evaluation board are tested and reported in this document. The TPS92310 also integrated various protection features: Over-Voltage Protection (OVP), Thermal Shut Down (TSD) and cycle-by-cycle Over-Current Protection (OCP). With these features in place, the system is well protected against open and short circuit of the LEDs string. Considering with the EMI problem, the TPS92310 integrates an internal delay timer to improve it. The delay time can be programmed through an external resistor, it can ensures the controller switch ON the MOSFET only when the MOSFET’s drain voltage at its lowest point. The Quasi-resonant switching operation improves the EMI and system efficiency significantly.
TPS92310 EVM-8W評估模塊典型應用:
LED Lamps:
• A19 (E26/27, E14)
• PAR30/38
• GU10
Domestic and Office SSL solutions:
• Down Light
• LED Panel Light
• Ceiling Lamp Troffer
• T8 Tube
TPS92310 EVM-8W評估模塊主要特性:
• Application input voltage: 90VRMS-132VRMS or 180VRMS-264VRMS
• Primary side Fly-back LED current regulation
• Adaptive ON-time control with inherent PFC
• Critcal-Conduction-Mode (CRM) with Zero-Current Detect (ZCD) for valley switching
• Quasi-resonant switching to benefit the EMI and efficiency
• Programmable FET Switch-On-Delay
• Constant ON-Time (COT) and Peak Current Mode (PCM)
• LED current setting with external sense resistor
圖5.TPS92310 EVM-8W評估模塊(120V/230V)電路圖
圖6.TPS92310 EVM-8W評估模塊外形圖
圖7.TPS92310 EVM-8W評估模塊連接圖
TPS92310 EVM-8W評估模塊材料清單:
圖7.TPS92310 EVM-8W評估模塊元件布局圖:頂層
圖8.TPS92310 EVM-8W評估模塊元件布局圖:底層
詳情請見:
http://www.ti.com/lit/ds/symlink/tps92310.pdf
和
http://www.ti.com/lit/an/snva631/snva631.pdf
TPS92310: Off-Line Primary Side Sensing Controller with PFC
The TPS92310 is an off-line controller specifically designed to drive high power LEDs for lighting applications. With the primary side sensing, constant on-time and quasi-resonant switching techniques, the TPS92310 application circuit gives high Power Factor, good EMI performance and high system efficiency. Also, using this device, low external component count application solutions can be designed easily. Power Factor Correction is inherent if the TPS92310 is operated in the constant on-time mode with an adaptive algorithm. The control algorithm of TPS92310 adjusts the on-time with reference to the primary side inductor peak current and secondary side inductor discharge time dynamically, the response time of which is set by an external capacitor. Also, minimized EMI and switching loss is achieved with quasi-resonant switching. Other supervisory features of the TPS92310 include cycle-by-cycle primary side inductor current limit, VCC under-voltage lockout, output over-voltage protection and thermal shutdown. The TPS92310 is available in the MSOP-10 package.
TPS92310主要特性:
■ Regulates LED current without secondary side sensing
■ Adaptive ON-time control with inherent PFC
■ Critical-Conduction-Mode (CRM) with Zero-Current Detection (ZCD) for valley switching
■ Programmable switch turn ON delay
■ Programmable Constant ON-Time (COT) and Peak Current Control
■ Over-temperature protection
TPS92310應用:
■ LED Lamps: A19 (E26/27, E14), PAR30/38, GU10
■ Solid State Lighting
圖1.TPS92310方框圖
圖2.TPS92310典型應用電路圖
圖3.TPS92310隔離拓撲電路圖
圖4.TPS92310非隔離拓撲電路圖
TPS92310 EVM-8W評估模塊
The TPS92310 EVM-8W evaluation module is a constant current output LED driver supporting 5W to 8W applications.
The design focuses on applications that require small form factor and minimal number of external components. The actual PCB dimension of the module is only 22mm x 55mm x 19mm (L x W x H). The module can work with AC line input from 90 to 132VRMS or 180 to 264VRMS and supplying 350mA current into a single string of LEDs, typically 6-7 LEDs in series.
The evaluation board is carefully designed to comply with major industrial EMC and safety requirements. The user can make use of the information provided in this document, TPS92310 datasheet and application notes to design its specific end product easily.
The TPS92310 EVM-8W is developed with the TPS92310 controller IC. The TPS92310 is a single-stage AC/DC controller dedicated for LED Lighting applications. The controller uses a primary-side current sense configuration to control the LED current at secondly side. The system works in Critical Conduction Mode (CRM) with flyback topology and it employs a constant on time modulation scheme. Inherently, systems with this configuration can achieve greater than 0.90 Power Factor (PF) easily. The Power Factor (PF) and line current harmonic performances of the evaluation board are tested and reported in this document. The TPS92310 also integrated various protection features: Over-Voltage Protection (OVP), Thermal Shut Down (TSD) and cycle-by-cycle Over-Current Protection (OCP). With these features in place, the system is well protected against open and short circuit of the LEDs string. Considering with the EMI problem, the TPS92310 integrates an internal delay timer to improve it. The delay time can be programmed through an external resistor, it can ensures the controller switch ON the MOSFET only when the MOSFET’s drain voltage at its lowest point. The Quasi-resonant switching operation improves the EMI and system efficiency significantly.
TPS92310 EVM-8W評估模塊典型應用:
LED Lamps:
• A19 (E26/27, E14)
• PAR30/38
• GU10
Domestic and Office SSL solutions:
• Down Light
• LED Panel Light
• Ceiling Lamp Troffer
• T8 Tube
TPS92310 EVM-8W評估模塊主要特性:
• Application input voltage: 90VRMS-132VRMS or 180VRMS-264VRMS
• Primary side Fly-back LED current regulation
• Adaptive ON-time control with inherent PFC
• Critcal-Conduction-Mode (CRM) with Zero-Current Detect (ZCD) for valley switching
• Quasi-resonant switching to benefit the EMI and efficiency
• Programmable FET Switch-On-Delay
• Constant ON-Time (COT) and Peak Current Mode (PCM)
• LED current setting with external sense resistor
圖5.TPS92310 EVM-8W評估模塊(120V/230V)電路圖
圖6.TPS92310 EVM-8W評估模塊外形圖
圖7.TPS92310 EVM-8W評估模塊連接圖
TPS92310 EVM-8W評估模塊材料清單:
圖7.TPS92310 EVM-8W評估模塊元件布局圖:頂層
圖8.TPS92310 EVM-8W評估模塊元件布局圖:底層
詳情請見:
http://www.ti.com/lit/ds/symlink/tps92310.pdf
和
http://www.ti.com/lit/an/snva631/snva631.pdf
本站內容除特別聲明的原創文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯系電話：010-82306118；郵箱：aet@chinaaet.com。