</a>LED" title="LED">LED" title="LED">LED驅動器,采用恒流(CC)驅動,而SSL2109參考板UBA3070能工作在230V(50Hz)或120 V (50 Hz 或60 Hz) 火線電壓.本文介紹了UBA3070參考板指標,電路圖,材料清單和PCB布局圖.
This document describes the performance, technical data and the connection of the SSL2109 reference board. The SSL2109 is an NXP Semiconductors controller IC intended to provide a low cost, small form factor LED driver. The reference board is intended to operate at 230 V or 120 V (AC), using an output voltage of 30 V or greater.
The board is optimized for a 230 V (50 Hz) or 120 V (50 Hz or 60 Hz) mains supply. In addition to the mains voltage optimization, the board is designed to work with multiple LEDs or an LED module with a high forward voltage. Mains connection of the reference
board is different from other general evaluation/reference boards. Connect the mains to the screw connector J6.
The SSL2109 is a highly integrated switching mode LED controller which enables Constant Current (CC) driving from the mains input. It is a solution for small to medium LED retrofit lamp application, especially for low-power factor design. The SSL2109 is a buck converter controller suitable for non-isolated, non-dimmable LED retrofit lamps. It can drive long LED strings with, typically 70 V forward voltages. The SSL2109 is intended to operate with higher output voltages, as in modern LED modules.
圖1.SSL2109 UBA3070參考板外形圖:頂視圖
圖2.SSL2109 UBA3070參考板外形圖:底視圖
SSL2109 UBA3070參考板指標:
圖3.SSL2109 UBA3070參考板電路圖
UBA3070參考板材料清單:
圖4.SSL2109 UBA3070參考板元件布局圖:頂層
圖5.SSL2109 UBA3070參考板元件布局圖:底層
詳情請見:
http://www.nxp.com/documents/user_manual/UM10512.pdf
This document describes the performance, technical data and the connection of the SSL2109 reference board. The SSL2109 is an NXP Semiconductors controller IC intended to provide a low cost, small form factor LED driver. The reference board is intended to operate at 230 V or 120 V (AC), using an output voltage of 30 V or greater.
The board is optimized for a 230 V (50 Hz) or 120 V (50 Hz or 60 Hz) mains supply. In addition to the mains voltage optimization, the board is designed to work with multiple LEDs or an LED module with a high forward voltage. Mains connection of the reference
board is different from other general evaluation/reference boards. Connect the mains to the screw connector J6.
The SSL2109 is a highly integrated switching mode LED controller which enables Constant Current (CC) driving from the mains input. It is a solution for small to medium LED retrofit lamp application, especially for low-power factor design. The SSL2109 is a buck converter controller suitable for non-isolated, non-dimmable LED retrofit lamps. It can drive long LED strings with, typically 70 V forward voltages. The SSL2109 is intended to operate with higher output voltages, as in modern LED modules.
圖1.SSL2109 UBA3070參考板外形圖:頂視圖
圖2.SSL2109 UBA3070參考板外形圖:底視圖
SSL2109 UBA3070參考板指標:
圖3.SSL2109 UBA3070參考板電路圖
UBA3070參考板材料清單:
圖4.SSL2109 UBA3070參考板元件布局圖:頂層
圖5.SSL2109 UBA3070參考板元件布局圖:底層
詳情請見:
http://www.nxp.com/documents/user_manual/UM10512.pdf
本站內容除特別聲明的原創(chuàng)文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創(chuàng)文章及圖片等內容無法一一聯(lián)系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯(lián)系電話：010-82306118；郵箱：aet@chinaaet.com。